This may be applied to floor, wall, ceiling vents, or even vents in your bathroom. This instruction will work regardless of where you have your vent. Follow this guide on how to clean vents in the bathroom to make sure you do not have any safety or health hazards.
Important Tips to Keep in Mind
Be sure to switch off your Ventilation system before you begin any cleaning! Your furnace and air conditioner are included in this. However, you may be able to accomplish this using your thermostat or manually.
You’ll need a few particular instruments to clean your air ducts thoroughly.
- Vacuum – Make sure it has a tube and nozzle connection so that you can go deeper into your ducts while vacuuming.
- Brush – toilet brushes or paint brushes may be used.
- Screwdriver -To uncover vents.
- Paper Towels – While cleaning, you’ll need paper towels to wipe away the dirt.
- Air Filter – To replace it, you’re done with your cleaning.
Removal of the vents
Many vents need a screwdriver, while others may be removed with a simple pull. Remove and set aside your vents.
Vacuuming the Vents
Take your vacuum’s hose and run it through your ducting! The ducts should be cleaned as thoroughly as possible. Don’t go too far into the ducts; at this point, just the area surrounding the vents has to be cleaned out.
Cleaning of Air Ducts
Dust and grime may build up in your vents, so use a duster to remove it all. Take this dust and toss it in the garbage; be careful not to spread it about! Please use a waste bag to collect dust from your vents to avoid getting it in your eyes, ears, and nose.
Prepare a sink full of soapy water.
Dish soap and warm water are easy to get by. Having a lot of lather in the water indicates that it has been adequately cleaned.
If you don’t have a tub, a washing basin or buckets can work fine for this task.
Allow your vents to soak.
The main cleaning takes place here. For 10 to 15 minutes, immerse your vents in a tub or basin. If your vents are iron or non-stainless steel, they may rust if you leave them to soak for more than 15 minutes.
We bathe the vents to remove any oil or sludge that permits dust to accumulate on the vents. To avoid cleaning them again for a time, put them back this way.
Put the vents back on.
Putting your vents back on should be as straightforward as taking them off. Your HVAC system won’t have any troubles if your vents are still damp from the rain. However, it would be best if you made every effort to dry them completely.
Restart your Ventilation system after replacing the air filter
Replace the air filter in your furnace by going to the location where it is. Filters may get blocked, resulting in dust buildup in the air vents. There is no need to change the filter if it is clear.
Conclusion
Turn on your heating and air conditioning system after changing your air filter. You won’t have to worry about cleaning your vents for the next several months.