Maintaining the quality and beauty of your shower’s stone tile is easy with a little TLC. With the right maintenance, your stone will appear brand new for years to come. With a dishwashing liquid, a microfiber towel, and a soft-bristle brush, you can remove most types of grime from your stone tile. Remove oil-based stains from stone tile using ammonia or another appropriate solution after determining the kind of stain. Following this guide on how to clean porous stone bathroom tiles will help you extend the life of your porous stone tiles.
Remove loose dirt and debris using a damp cloth.
Warm water and a clean, soft cloth (microfiber) are ideal. Using a new microfiber towel, gently wipe the shower’s stone tiles and grout. This will simplify you to locate and removing the most stubborn stains and buildups.
- The softest clothing is best for your stone’s polish since it won’t scratch it. Your stone’s surface may get pitted or clouded over time if you choose a too rough cloth.
Use a toothbrush and a light detergent to clean the grout
Grout collects in the confined spaces between the tiles, which is why it is so common in bathrooms. Scrub the grouted gaps between tiles with a toothbrush, warm water, and a light detergent such as dishwashing liquid. Afterwards, thoroughly clean the area with water and repeat the process until the grout is completely clean.
- Cleaning the grout first will help to keep the filth from migrating to the actual tile.
- Abstain from using grout cleaning chemicals.
- Brushes with stiff bristles may leave scratches on your stone’s surface and damage its gloss. When cleaning, use only soft bristle brushes and microfiber towels.
Use a light detergent or stone soap to wash the stone
Warm water and a few drops of a light detergent, such as dish soap, should be mixed. To evenly distribute the soap, stir the fluid. Remove any extra liquid from the solution before using it to wipe clean the tiles. While doing this, be sure to rinse the tiles often.
- Soaps made for natural stone may be purchased at most hardware shops.
- Acidic cleaners may damage the stone tile. Use only pH-neutral cleansers (those with a pH value of 7 or above).
- There is no guarantee that more soap is better. If you use too much soap in your cleaning solution, you risk leaving stains or a film behind on your tiles.
Soak soap scum in ammonia and water to remove it
Scum buildup is frequent in bathrooms, but it may be hard to remove. Using a solution of half a cup of ammonia and a gallon of water, you can get through it. Using a delicate cloth, wipe the solution onto the tile.
- If you clean your stone with ammonia too regularly, it can lose its lustre and become dull.
- Avoid soap scum buildup by keeping up with regular cleaning.
- After cleaning, dry the stone. Avoid letting cleaners like ammonia or hydrogen peroxide sit on your stone for extended periods. Using a clean, soft towel, wipe the tiles dry after being properly rinsed.