Mould and mildew may be removed from your bathroom by various methods, both natural and chemical. While removing the apparent evidence of mould build-up is important, it isn’t enough to kill the mould and prevent its recurrence. To learn how to clean it, follow this guide on how to clean mould on bathroom tiles.
Vinegar
The essential things to remember when using vinegar to eliminate mould are to use mild white vinegar and not dilute it in the spray container.
- Using a spray bottle, apply vinegar to the afflicted areas.
- After an hour, open the windows and ventilate the room.
- Warm water and a soft cloth should be used to clean the surfaces.
- To avoid mould re-growth, use a towel to dry the area.
Borax
As a bonus, borax is far less expensive than other mould removal options and can be found in the cleaning aisle of your local grocery store.
- 4 litres of warm water and 1 cup of borax
- Brush or use a cleaning pad to apply the solution to the troublesome spots.
- Please dispose of the solution by rubbing it out with a damp cloth.
- As time goes by, the spots will gradually dry out.
Sodium Bicarbonate with Bleach
If you’re looking to remove mould or mildew from your grout, tiles, or walls, this is one of the finest ways to get the job done quickly and effectively. Wearing gloves is a must.
- Mix 1 part bleach to 2 parts water & pour into a spray bottle
- Please wait for the solution to dry before applying it to the afflicted areas.
- Another sprinkle and a gentle scrape with a brush will do the trick.
- Repeat the rinsing process until all traces of mould are gone.
Ammonia
Always avoid mixing bleach and ammonia. The combination of the two produces toxic gases that might harm your health. DIY stores sell ammonia in clear, hazy, and sudsy versions.
- Fill a spray bottle with ammonia and shake it well.
- In the bathroom, apply to the afflicted regions.
- A gentle brush may be used to scrub the spots and then left for two hours.
- During the cleaning procedure, open the windows to let fresh air in.
- Wipe away ammonia when it has dried in the desired spots.
Bleach (H2O2)
There are many strengths of hydrogen peroxide on the market. A gentle 3 percent hydrogen peroxide solution is ideal for removing mould from the bathroom. A wide variety of DIY stores and supermarkets carry this product. When using hydrogen peroxide, be sure to store it in a dark spray container to avoid reducing its cleaning power by exposing it to direct sunlight. Vinegar may be added to the spray container to boost the hydrogen peroxide solution.
- Use a spray bottle and apply the solution to the afflicted regions.
- Set aside 2 to 3 hours.
- While cleaning, keep the room aired.
- Clean all surfaces by wiping them down.
Mould Sprays Designed for Mould Control
There are several mould removal sprays on the market nowadays if you don’t want to produce your cleaning products at home. To prevent costly blunders, do your homework on the efficacy of each product and read user testimonials.