Another reason for the popularity of marble is that it is so easy to maintain. Remember that acidic materials like lemon juice and vinegar should be avoided at all costs. You may be able to get a non-abrasive stone cleaner for marble, but it’s still a good idea to check the labels carefully. Alternatively, you may save money by following this guide on how to clean marble bathroom counters.
- Spray the bathroom counter with a mixture of mild, non-abrasive dish soap and warm water if you’re not using marble cleaning. Wipe away the soapy solution with a clean, moist towel after a gentle scrub. Repeat the procedure until all soapy residue is removed.
- In the second step, use a soft absorbent towel to wipe the bathroom counter clean and dry it.
Remover Marble Bathroom Counter Stains
Marble stain removal is more difficult than a simple cleaning. What matters most is accurately pinpointing and then administering a suitable chemical or poultice to the stain source (a paste-like cleaning agent). As a stain-fighting toolbox, the following items are at your disposal. Stains may be removed more easily when addressed as soon as possible.
Precaution: Never combine cleaning products or chemicals since the results might be harmful or fatal. Before cleaning, test the cleaning agent in an inconspicuous area to ensure it is suitable for the job and will not harm the surfaces being cleaned. Work in a well-ventilated location and use proper clothes, such as gloves and eye protection.
i. Oil-based stains
Grease, cooking oil, milk, or cosmetics, including oil, can discolour the stone and must be removed chemically. Use one of the following gentle cleaners: a bleach/ammonia/mineral spirits/acetone/soft liquid cleanser.
ii. Organic Stains
Use a 12 percent H202 solution and a trickle of ammonia to remove tea, wine, and the many different types of food stains (which are often pinkish-brown in colour). Clean cloth and blot the spot. Dry with a chamois and rinse with a moist towel.
iii. Biological Stains
Spray a mixture of one part water, three parts of bleach, commonly found in supermarkets, and a dash of liquid dish soap on mildew spots to remove them. Replicate the misting process to remove the stain from the affected area completely. Rinse and dry with clean, clear water
iv. Water Spots and Rings
Use a dry 0000-rated steel wool pad to remove any remaining water stains. Smaller dings and dings may be repaired using the same pad. Re-polishing may be necessary for more serious issues. Use coasters and trivets on countertops in the future.
v. Metal Stains
It’s common to see iron and rust stains that are orange to brown in hue, whereas copper and bronze staining tend to be green or muddy brown. Apply a poultice to the problem:
- Water should be added to a thick peanut butter-like mixture of commercial poultices (available at stone maintenance supply firms).
- Apply the stain in a thick layer of 14 to 12 inches. Spread the paste evenly with a wood or plastic spatula.
- Tape the edges using painter’s tape to keep the plastic wrap in place. Permit it to sit for a minimum of 24 and a maximum of 48 hours.
- Afterwards, remove the plastic, wait for the poultice to dry, and remove the stain.
- Remove the poultice using a wood or plastic scraper after drying to the touch. Use a delicate towel to wipe the area off with distilled water.