Is there a more tedious house cleaning task than scrubbing the toilet? In most cases, the answer would be “no.” To determine the quality and kind of water in your home, look for brown stains in places like the bathtub and shower. Bathroom cleaning may be a difficult task. If you got hard water stains that won’t go away, it might take two days to clear them completely.
It will take some minutes to remove stubborn water stains with a few of our tips (without damaging ruining the finishing of the porcelain). learn with us how to clean brown stains out of toilet bowl
Tips:
- If you’re going to attempt to clean out stains from your toilet, the first step is to turn off the main water tap on the wall behind the toilet.
- Use a nylon bristle brush if you’re using one.
Vinegar:
- You may use vinegar as a softening and lifting agent in your toilet bowl because of its acidic nature.
- To clean the toilet, pour one liter of undiluted vinegar around the bowl’s rims.
- Leaving it in for about three hours should be enough.
- White vinegar may be used to remove any remaining stains.
- To get rid of any lingering odors, flush the toilet.
- If necessary, repeat.
Sandpaper:
Sandpaper has been shown to be the most effective stain remover in the long run. For 90% of the work, use medium-grain sandpaper; use fine-grain sandpaper for the remaining 10%.
- Use medium sandpaper to sand the stain back to its original color.
- If you press too firmly, you run the risk of damaging or scratching the bowl.
- Fine grit sandpaper may be used to buff out the stain.
- Flush the toilet once you’ve cleaned it and dried it with a towel.
Vinegar and baking soda:
If vinegar by itself didn’t provide the effects you were hoping for, try it in combination with baking soda. Put some spoons of baking soda and a couple of cups of vinegar into the toilet bowl. Using a brush, gently swirl the mixture around the bowl for a few seconds before setting it aside 15 minutes. Your brush can help you remove the spots. Finally, run a few gallons of water through the system.
Paste of Borax:
A borax paste may be used to remove stubborn stains. So, here’s how to go about it:
To obtain a good picture of where the mold is, wipe out the toilet bowl.
- Borax and water may be used together to form a paste. Make sure that the paste is thick enough to adhere to the bowl’s walls.
- Scrub carefully with a hand brush after applying the paste to the hard-stained regions to ensure that the paste is distributed evenly throughout the bowl.
- Take a half-hour break and let it settle in.
- Scrape off the dark spots with a little scrubbing after you’ve returned.
- To complete the task, flush the toilet.
Myths:
Bleach:
We can’t dispute that bleach comes in handy for a slew of domestic chores. The stain will remain and grow more obvious over time, even if bleach seems to neutralize it by lightning it. This is why we don’t advocate using bleach.
Coca-Cola
The acidity of this widely used beverage won’t help things much.
What’s more, if you attempt the magic trick, things will become much worse. If you’re willing to risk and make the stain darker, then use Coca-Cola.