Nothing is more unsettling than getting ready for a nice bath or shower only to be confronted by a foul-smelling shower drain. It’s much worse when you realize the water isn’t draining after you’ve toweled off.
A blocked shower drain is inconvenient, particularly if it occurs regularly. Fortunately, most odor and blockage concerns in the shower drain are simple to resolve. To learn how to clean a shower drain trap, follow this step-by-step instruction.
Screws and fastenings must be secured.
Remove the drain tap and any plugs that may be in your tub before you begin cleaning. You’ll need to have a screwdriver to unscrew two or three screws that keep the drain trap in position over most non-combination tub/shower drains. Before you dismantle the metal grating, keep in mind you extract all of the screws and store these in a zip lock bag or somewhere safe distance from the drain and shower floor. It might be very hard to retrieve a screw that has fallen into the drain.
Pull out what you’ve got.
Throw on some rubber or latex gloves at this point. If you pull up a blocked plug, a huge clump of hair and shower scum is likely to show up with it. You’ll need to stretch your hand down into the shower drain grate if you’re merely lifting it. Pull up as much blocked hair and shower scum since you can reach it easily. You’ll want to continue to the following, the more intrusive procedure to ensure you’ve removed all of the blockages.
Longer Reach
You’ll need something with a longer reach when you cannot reach the clog anymore. You may buy different washroom items at the shop or build the stuff you already have around the house.
Zip Tie
It could save you a shopping trip if you have a couple of zip ties on hand. Bring the zip tie and a set of strong scissors with you. Make angled small cuts in the zip tie. To make small barb-like holes, cut at some upward angle. Once you press the zip tie into the shower drain, it will easily glide into place. When you start pulling it out, the notches will grip any strands or clumps of filth and transport them out.
Shower Drain Trap Cleaning
You’ll need to run a cleanser into your shower drain after you’ve cleaned the clog.
You most likely already have one of the finest shower cleaners on hand. Baking soda can unclog a clogged shower drain, and when mixed with vinegar, it’s a powerful one-two punch.
- Drop a large amount of baking soda into the drain of your shower. It’s fine if some fall over the edge. To get the most out of it, sweep it down the drain.
- After that, pour a cup of white vinegar into the shower drain. Don’t sprinkle too slowly since it’ll react quickly.
- Finally, use a wrapped washcloth to cover your drain. It will assist the reaction to go into the drain rather than back up.
- Allow this strong cleanser to work for 15 to 20 minutes without interruption.
- Take off the clothes and run some water through them. Your shower should be draining smoothly at this point.
Bottom line
You must adopt a weekly shower drainage cleaning routine to assist you in preventing another unpleasant shower that won’t drain. You may no longer be scared by a hard clog that destroys your shower now since you understand how to clean a shower drain trap.