Some things seem to be more captivating than seeing your ruby ring shine and swirl in the light once it has been properly washed and polished. Grease, dirt, and makeup remnants build up on the ruby’s surface due to everyday use. Bacteria thrive in unclean rings, causing skin discomfort, metal discoloration, and stone chipping. Understanding how to clean a ruby ring yourself is essential for keeping it looking good and clear of germs. To learn how to clean a ruby ring, keep reading.
- Fill a small jar or basin. Allow the ruby stone to rest for 20 minutes after adding a few drops of light liquid soap to warm, not boiling, water. Unless you’re scrubbing many gemstones or pieces at once, ensure your cleaning dish isn’t overcrowded.
- Remove the dirt with a scrub. Gently massage the ruby stone and set it with a fine stiff brush or cloth to remove debris or grime. So that the ruby will not become unsafe, don’t scrape too hard or go too deeply within crevices.
- Replenish the water with it. Examine the stone carefully to determine how much extra cleaning is required. Twirl it around in the liquid solution one final time to remove any remaining dirt if it seems bright and spotless. If it’s still unclean, fill the dish with fresh water and the solution again and immerse it before cleaning.
- Completely dry the ruby. Use a dried, lint-free towel to wipe the ruby stone when wearing or storing, put it on a towel or cloth to dry completely.
Cleaning by Ultrasonic
Cleaning ruby using an ultrasonic cleaner is typically safe. Nevertheless, the cleaning procedure has the potential to loosen certain kinds of settings, so double-check your jewels beforehand.
- Before you polish your ruby, inspect it. It must be fine to use in an ultrasonic cleaner, except the ruby stone is fracture-filled and covered to enhance its color.
- Create a solution. In the ultrasonic cleaner container, combine hot water and a few drops of dish detergent.
- Combine the ingredients and mix well. Allow five to ten minutes for the solution to fully mix in the device before using it.
- In the cleaner, place your rubies. To prevent scratches during the cleaning process, place a few pieces into the ultrasonic cleaner at a time.
- The gadget should be turned on. Operate the cleaner for up to 20 minutes, according to how dirty the ruby is. Begin with a shorter time frame if it’s your first experience washing your stone, and add on if it’s still unclean.
- Allow your jewelry to rest in the cleaner for an extended period. Allow your rubies to rest for 10 minutes once the ultrasonic cleaner has completed its cycle. It will aid in the loosening grime and dirt falling to the device’s bottom.
- Scrub the ruby with a soft cloth. Scrub the stone slowly and carefully. Dry your ruby using a lint-free cloth after it’s properly cleaned.
Bottom Line
If you own a ruby ring like this, take extra care of it and protect it from strong cleaning agents and cosmetics. Put the ruby ring in a wooden box or covered in a soft fabric, preferably in a soft pouch or plastic bag.